Nikon Camera Control Pro v2.1.0 
Info:
This software remotely controls most functions of Nikon digital SLRs from a
computer that is connected via USB cable or through wired or wireless LAN using
a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such
as Viewer for preview and selection of images prior to transfer to a computer,
Liveview function and Picture Control System are supported. It also supports
workflows of Nikon’s exclusive photofinishing software Capture NX (optional) and
browser and viewer software ViewNX.
Main Features:
* Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
* In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
* Enhanced viewer function enables thumbnail display of images stored in a computer.
Compatible with the new functions of the Nikon D3/D300:
* Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
* Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
* It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
* 51-point AF can be controlled and displayed.
* Fine tuning of the new white balance is available.
Integration with other Nikon software:
* Support for ViewNX browser and viewer software
* Support for Capture NX photo-finishing software
Supported Cameras:
D3, D2Xs, D2X, D2Hs, D300, D200, D100, D80, D70s, D70, D60, D50, D40X, D40
* The D1X, D1H, and D1 not supported on computers with Intel CPUs running Mac OS X ver.10.3.9
Homepage: Code:
http://imaging.nikon.com/products/imaging/lineup/software/control_pro2/index.htm
Download: Code:
2.0.0
http://nikonusa.com/software/CameraControlPro/20/win/CCPRO20NSAEN.exe
Update to 2.1.0
http://nikonusa.com/software/CameraControlPro/2.1.0/CCPRO210EN.exe
Patch: Code:
http://rapidshare.com/files/112861089/nccp.2.x.patch.rar
Links checked on 10/12/08 [Egy-Warez_Linkchecker_Bot] ( Egy-Warez Bot )
Links checked on 18/02/09 [Egy-Warez_Linkchecker_Bot] ( Egy-Warez Bot )
Download Nikon Camera Control Pro v2.1.0 Here (Guaranteed Easiest-To-Download!) 
Nikon Camera Control Pro v2.1.0 
Or 
Linear Mode
